Harbor Freight Trailer Build Part 3

    The interior consists of two benches that slide out to form beds with a short seat back on piano hinges that fold down to level out the bed. One one side is a shorter bench/bed and a slightly larger counter height table. After looking at the table installed I decided that it was just a tad too high for my envisioned flooding wall. So I lowered the other table by roughly half an inch. The right side has a slightly longer and wider bench/bed that properly fits my 72”x24 sleeping pad. The sleeping pad slightly bunches up on the shorter side, but my 5’ 6” body can comfortably lay on it if I were to lay an inflatable sleep pad on top of the green one.

    The bench is pretty simple with a slot put into the lower bench with a screw drilled to the top and a wood block underneath the bench to keep everything together, I didn’t realize that the dead bolt was a double key lock until after I opened the package. For the tables, a cooler could fit on one side with a chuck box under the other table. I need to figure out a way to keep the folding seat back up when the bed is slid into being a bench.